Autosync Images

[Trent S]

Below you can download uncompressed autosync images that will help your monitor sync to the intended resolution.



640x480
800x600
1024x768
1280x720
1280x768
1280x1024
1360x768
1366x768
1440x900
1600x1200
1680x1050
1920x1080
1920x1200

[mark_anderson_us]

Hi Guys

How should these be used. Are they loaded on the palyer somewhere to force it to a specific res?

Regards

Mark

[Sergey K]

Hello Mark,

Auto-sync images are only used with VGA (analog) connected SF-100e players, while monitors connected via HDMI/DVI (digital) generally do not require auto adjustment. Most monitors will auto-adjust to the borders of the imbedded auto-sync image displayed at boot-up. If the monitor needs to be auto-adjusted and the image displayed does not have a defined border (images that are dark around the edges), you will need to use the auto-sync image or the monitor may not scale the image to fit the screen correctly. These templates can be loaded into an image region of a project and published to auto-adjust the monitor with the borders of the image.

To change the resolution of the player, you will need to select the player in the MANAGE tab and choose the resolution from the dropdown menu in the right side panel. Next, click the Apply button and wait for the player to go through a firmware update. The player will then reboot and change into the selected resolution. This process usually take between 3-5 minutes.

At this point, if the image does not properly adjust to the screens edge, you will have to choose the appropriate resolution auto-sync image to publish and press the auto adjust button on your monitor.

If you have any addition question, please let me know.

Kind Regards,
Sergey