SF-200 Continually Cycles between Updating and Disconnected

Post Reply
APrough
Forum User
Forum User
Posts: 2
Joined: Tue Mar 31, 2015 4:18 pm

SF-200 Continually Cycles between Updating and Disconnected

Post by APrough »

I configured the SF-200 through the ip address. Have rebooted the device through Suite and have powered it on and off. On the actual monitor I see the greyscale test and the ip address, but Suite is still cycling through the two screens. Every other player is showing correctly in the Suite.
Martin-Noventri

Re: SF-200 Continually Cycles between Updating and Disconnec

Post by Martin-Noventri »

Hi APrough,

This may be caused by corrupt data on the SF-200's USB thumb drive. Try reformatting the thumb drive by powering down the player, remove the USB drive, reformat it, plug it back in and reconnect power to the player.

Please let us know if this solves your issue.

Kind Regards,
Martin
APrough
Forum User
Forum User
Posts: 2
Joined: Tue Mar 31, 2015 4:18 pm

Re: SF-200 Continually Cycles between Updating and Disconnec

Post by APrough »

Reformatting the thumb drive worked. Thanks!
Post Reply