|
|
It is currently Thu May 23, 2013 12:55 am
|
View unanswered posts | View active topics
 |
|
 |
|
| Author |
Message |
|
de-tthomalla
|
Post subject: SF-100e resolutions  Posted: Wed Jan 26, 2011 9:58 am |
| Regular Contributor |
 |
Joined: Fri Dec 17, 2010 10:22 am
Posts: 12
|
|
Can someone explain the resolutions - what is SCODEC?
I have a 1920x1080 monitor, and I can connect it via VGA using the VGA Only resolution, but there isn't a 1920x1080 DVI resolution, just 1920x1200. Can someone clarify this?
Tom
|
|
|
|
 |
|
Andrew H
|
Post subject: Re: SF-100e resolutions Posted: Mon Jan 31, 2011 10:42 am |
| Noventri Digital Signage Expert |
 |
 |
Joined: Thu Dec 10, 2009 1:54 pm
Posts: 20
|
Hello Tom, To answer your first question, SCODEC is a compression scheme to bring file size down. This enables faster image transitions and faster project loading times. It does lower the quality of the image a bit. If you need up to 1 second transitions though, SCODEC is the way to go. We are currently optimizing the 1080 DVI resolution and it will be included in an upcoming firmware upgrade. In the meantime, even though the VGA resolution says "VGA ONLY", it should work fine for you even though you're connected to the screen with a DVI cable. Please let me know if this answered your questions or if you have any troubles with the VGA Only resolution. Andrew Hoffman Vice President Noventri 20940 Twin Springs Dr. Smithsburg, MD 21783-1510 USA 800-359-1858 301-790-0103 Fax: 301-790-0173 andrewh@noventri.comSkype ID: Spec-Comm www.noventri.comwww.noventri.com/ecowww.noventri.com/forumhttp://blog.noventri.com/
|
|
|
|
|
|
|
de-tthomalla
|
Post subject: Re: SF-100e resolutions Posted: Thu Feb 03, 2011 4:26 pm |
| Regular Contributor |
|
Joined: Fri Dec 17, 2010 10:22 am
Posts: 12
|
|
I was able to get it to work using DVI to HDMI using the "VGA Only" resolution. However, the sleep mode doesn't seem to work right. When the player goes to sleep (nothing scheduled) it keeps turning the screen on and off every 15 or 20 seconds or so. I'm not sure if this is something the firmware will address or an issue specific to my monitor.
|
|
|
|
|
|
|
de-tthomalla
|
Post subject: Re: SF-100e resolutions Posted: Fri Feb 04, 2011 12:53 pm |
| Regular Contributor |
|
Joined: Fri Dec 17, 2010 10:22 am
Posts: 12
|
|
I have an LG M4214C, for reference. It does not have a dedicated DVI port, but the HDMI port is labled "HDMI/DVI".
|
|
|
|
|
|
|
de-tthomalla
|
Post subject: Re: SF-100e resolutions Posted: Fri Feb 04, 2011 1:48 pm |
| Regular Contributor |
|
Joined: Fri Dec 17, 2010 10:22 am
Posts: 12
|
|
VESA was checked when I tested it and the issue remained. I haven't tried it since the new software release, but I didn't think it would help.
|
|
|
|
|
|
|
Andrew H
|
Post subject: Re: SF-100e resolutions Posted: Fri Feb 04, 2011 2:06 pm |
| Noventri Digital Signage Expert |
|
|
Joined: Thu Dec 10, 2009 1:54 pm
Posts: 20
|
Ok. I just went over to engineering and tested this on a LG M4210 and it works fine. Engineering suggested that you try unplugging the HDMI cable while you're in the unscheduled state (when the screen should be sleeping) and see if it still turns on and off. If it does, that would rule out the SF-100e and would probably be a menu setting in the screen. Andrew Hoffman Vice President Noventri 20940 Twin Springs Dr. Smithsburg, MD 21783-1510 USA 800-359-1858 301-790-0103 Fax: 301-790-0173 andrewh@noventri.comSkype ID: Spec-Comm http://www.noventri.comhttp://www.noventri.com/ecohttp://www.noventri.com/forumhttp://blog.noventri.com/
|
|
|
|
|
|
|
de-tthomalla
|
Post subject: Re: SF-100e resolutions Posted: Fri Feb 04, 2011 2:53 pm |
| Regular Contributor |
|
Joined: Fri Dec 17, 2010 10:22 am
Posts: 12
|
|
I just tested it again. The screen only has one option for power management - DPM - and that is on. With DPM off it will not sleep at all on VGA or DVI/HDMI. It is cycling on and off with DVI/HDMI right now. It works OK with VGA. I modified my weekly schedule (M-F 7:30 to 4:30) to have friday to turn off early to make it sleep.
If I unplug the cable from the sf100e while it is cycleing, it stays sleeping.
|
|
|
|
|
|
|
Andrew H
|
Post subject: Re: SF-100e resolutions Posted: Fri Feb 04, 2011 5:21 pm |
| Noventri Digital Signage Expert |
|
|
Joined: Thu Dec 10, 2009 1:54 pm
Posts: 20
|
Hello Tom, I just went back to engineering and made sure that the VESA sleep issue wasn't a "VGA Only Resolution" issue but we performed all of the tests and everything works fine here. Our engineers feel that this may be a cable issue. If you can answer the following questions I'd appreciate it. How long is your cable? Is it a DVI to HDMI cable or an HDMI cable with an adapter? Do you have another cable to try? If you don't, we can send you a cable that we have tested here. Is the HDMI cable near any other devices that emit a wireless signal (cellular, walkie-talkies etc.) or any other type of interference? There has been a lot of documentation describing the fragile state of HDMI and how it reacts to interference. Andrew Hoffman Vice President Noventri 20940 Twin Springs Dr. Smithsburg, MD 21783-1510 USA 800-359-1858 301-790-0103 Fax: 301-790-0173 andrewh@noventri.comSkype ID: Spec-Comm http://www.noventri.comhttp://www.noventri.com/ecohttp://www.noventri.com/forumhttp://blog.noventri.com/
|
|
|
|
|
|
|
|
 |
|
 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
